Lighting information page

Lighting information

Thank you for choosing to make Max Rollitt Bespoke lighting a part of your project.

Every item of handcrafted furniture and lighting we make is the culmination of decades of historical knowledge and hands-on experience, both from our team at Yavington Barn and our network of talented UK-based artisans. And now, a little piece of that experience is yours to enjoy for many years to come.

Below, you’ll find everything you need to know to get your Max Rollitt lighting set up and working safely. If you have any questions, please contact bespoke@maxrollitt.com.

Assembly

1. Completely unpack your light, taking care to locate all parts, including lampshade, shade carrier and shade ring, if applicable.

2. Place your light on a flat surface, allowing plenty of room to work.

3. Fit the lampshade by unscrewing and removing the supplied shade ring from the bulb holder, positioning the shade carrier, and then securing it by screwing the shade ring back on.

4. Install the lightbulb(s); do not install lightbulb(s) of a different wattage or shape to that which is specified on the lampholder label.

5. Place the lampshade on the shade carrier.

6. Plug in the light and operate the switch to turn it on.

Safety Warnings

This product is designed for indoor use only and is not suitable for bathrooms or other wet locations.

Assembly
Do not plug the light into the mains until it is fully assembled with a lightbulb and lampshade. The distance between the surfaces of the lightbulb and lampshade must be at least 30mm

Cable Safety
To avoid a hazard, any damaged external flexible cables or cords should be replaced by Max Rollitt Bespoke Ltd. or a similarly qualified person. The warranty will be invalidated, and the product may be rendered unsafe if any modification is made to the light.

Before Maintenance
Always unplug the light before changing the lightbulb or cleaning the light (with a dry cloth).

USA Specific Instructions
Power Supply: Connect to a 120VAC, 50/60Hz supply.

UK & EU Specific Instructions
Power Supply: Connect to a 240V~ 50Hz supply, protected by a 3A fuse in the mains plug.

Troubleshooting

If your light will not illuminate, unplug it from the mains and remove the lightbulb to test it in a different light fitting that is known to be in good working order.

For UK & EU customers:
If the lightbulb proves to be functioning, replace the 3A fuse in the plug and check the relevant fuse in your household fuse box.

For USA customers:
If the lightbulb proves to be functioning, please proceed to contact us.

If the light still fails to illuminate, please contact with Max Rollitt Bespoke Ltd. directly.

Our range of lighting

Cookie	Provider	Duration
wordpress_logged_in_* Authenticated user session.	WordPress	Session
wordpress_test_cookie WordPress test cookie.	WordPress	Session
wp-settings-* WordPress admin settings.	WordPress	1 year
wpcb_consent Stores the visitor's cookie consent preferences.	This site	1 year

Cookie	Provider	Duration
_ga Used by Google Analytics to distinguish users.	Google	2 years
_ga_* Used by Google Analytics to persist session state.	Google	2 years
_gat Used by Google Analytics to throttle request rate.	Google	1 minute
_gid Used by Google Analytics to distinguish users.	Google	24 hours